| State | Proponent | Project Name | Project Summary | Australian Government Funding ($) | Total Project Cost ($) |
|---|---|---|---|---|---|
| NSW | Wollondilly Shire Council | Wollondilly Shire Council - Design and Construction of Brownlow Hill Loop Road Bridge, Brownlow Hill | The project will design and construct a 2 way concrete bridge, approximately 10m wide and 16m long, across lower mount hunter rivulet to replace the collapsed timber "Downes Bridge". The project will include road alignment to straighten the road, safe pedestrian access, increased volumetric capacity and maintain general access for heavy vehicles. | $1,044,992 | $2,089,984 |
| QLD | Noosa Shire Council | Noosa Shire Council - Design and construct Lake Doonella Bridge on Memorial Avenue, Tewantin | Noosa Council intends to renew the Lake Doonella Bridge, which has significantly deteriorated. Key focal points of the project encompass augmenting the bridge's current load-bearing capacity, modernising the bridge barriers, guardrails, and road approaches, as well as stabilising the southern road approach and bridge abutment to mitigate any potential settlement issues in the future. | $2,976,618 | $9,953,236 |
| QLD | Gympie Regional Council | Gympie Regional Council - Replacement of Smiths Bridge on Smith Road, Woolooga | The project will replace the existing 4.5T load limited single lane timber bridge at Smith Road, Woolooga with a single lane reinforced concrete bridge with an unlimited load limit. The project will include approaches, road alignment and safety barriers. Community and Emergency Services will be less reliant on a low level concrete floodway crossing of Wide Bay Creek on Pike Road. | $877,440 | $2,325,247 |
| QLD | Rockhampton Regional Council | Rockhampton Regional Council - Design and Construction of the New Scrubby Creek Crossing on Fairy Bower Road, Gracemere | The project will replace the existing single-lane concrete floodway structure with a two lane/two way concrete culvert, including guardrail and construction of new road approaches with improved alignment to the structure. | $1,684,800 | $2,106,000 |
| QLD | Ipswich City Council | Ipswich City Council - Replacement of Timber Bridge INF04314 on Purga School Road, Purga | The scope of this project is to replace the existing 36m long single-lane load restricted old timber bridge with a current industry standard two-lane road bridge. The project will include approaches and road alignment. This project will improve safety and remove load restriction from the network and improve/maintain flood immunity of the structure. | $5,000,000 | $7,975,663 |
| SA | District Council of Lower Eyre Peninsula | District Council of Lower Eyre Peninsula - Construction of Flinders Highway bridge, Hawson | The project will replace the existing undivided one lane, two way Flinders Highway bridge at Hawson, South Australia with a triple cell, 2.4m wide x 1.8 metre high concrete box culvert. The project will include guard rails, roadside furniture, new widened pavement up to 70m in length and upgrade of unsealed shoulders at approaches to improve driver safety and to increase structural capacity ensuring continued Heavy Vehicle access. | $587,716 | $783,622 |
| TAS | Latrobe Council | Latrobe Council - Design and construction of a replacement bridge over the Rubicon River on Smith and Others Road, Sassafras | This project will replace the existing two way one lane timber bridge over the Rubicon River on Smith and Others Rd, Sassafras with a one lane concrete bridge. The proposed new bridge would be designed in accordance with the current AS5100 series with an SM1600 load capacity and be made higher, wider and longer than the existing bridge. | $2,307,200 | $2,884,000 |
| VIC | Baw Baw Shire Council | Baw Baw Shire Council - Replacement of Contour Drain Bridge - bridge ID: B029 and Moe River Bridge - bridge ID: B030 on Factory Road, Yarragon | This project will replace two existing single lane, timber deck/steel beam bridges that are currently load limited at 20t. The bridges are proposed to be replaced with two single lane concrete bridges with a SM1600 load capacity. The project will also include some safety upgrades with replacement of guardrail, installation of line-marking and signage. | $1,384,000 | $1,730,000 |
| VIC | South Gippsland Shire Council | South Gippsland Shire Council - Design and Construction of four (4) bridges (KB80, KB90, KB100, KB120) on Bass Valley Road, Poowong | This project aims to replace 4 single lane bridges (KB080, KB090, KB100, KB120) on the Bass Valley Road in Poowong, Victoria. All four bridges were similarly constructed in 1916 and have experienced deterioration, and are reaching the end of their lifespan. | $3,033,600 | $3,792,000 |