• Funding program Investment Road and Rail Program
  • Status Completed
  • Transport mode Road
  • Expected start/finish Mid 2008 - Late 2017
  • Estimated project cost $6,330,621
  • Australian Government contribution $5,150,000
  • Local Council/Shire Yass Valley Council
  • State NSW
  • Corridor Canberra Connectors

Project description

The Barton Highway is a key link on the Sydney-Melbourne corridor, connecting the ACT to the Hume Highway. The 32.5 kilometres of the Barton Highway between the ACT border and the Hume Highway is a single carriageway, mostly two lane rural road with a number of overtaking lanes.

The works involved identification of the corridor for possible future duplication, some land acquisition and reservation of the corridor.

Benefits

The road boundaries have been provided to Yass Valley Council for inclusion in the Council’s Local Environment Plan. This will preserve the road corridor boundaries to allow for future upgrade to the Hume Highway in the area.

Funding

The Australian Government funded $5,150,000 towards the total cost of $6,330,621. The remaining $1,180,621 was contributed by the NSW Government.

Timetable

A display of the duplication corridor for environmental investigation was held in May 2008. Corridor boundaries for duplication were finalised included in Council's Local Environmental Plan from 19 July 2013.

Project last updated:

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.