South Eastern Freeway – Mount Barker (Bald Hills Road) Interchange

Funding program Investment Road and Rail Program
Status Completed
Transport mode Road
Expected start/finish Mid 2015 - Mid 2016
Estimated project cost $22,597,000
Australian Government contribution $13,418,000
Local Council/Shire District Council of Mount Barker
State SA
Corridor Melbourne - Adelaide

Project description

The project involved the construction of an interchange on the South Eastern Freeway at Bald Hills Road. Works included west-facing and east-facing ramps as well as a new roundabout at the Old Princes Highway and Bald Hills Road junction.

Benefits

The project is expected to achieve immediate safety outcomes and improve traffic flows for Mount Barker, while also being ready to meet future traffic demands with planned residential development in the Mount Barker area.

Funding

The Australian Government is contributing $16 million, the South Australian Government is contributing $8 million and the District Council of Mount Barker is contributing $3 million to this $27 million project.

Timetable

The project commenced in June 2015 and was completed August 2016.

Project last updated: 27 Sep 2019

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.

Project disclaimer

Submissions or registrations of interest to be kept informed about the progress of this work, can be made directly via email to costestimation@infrastructure.gov.au or by using the form below.

Items marked with (required) are mandatory fields.

Name (required)

Email (required)

Organisation

Position

Please enter your comment (required)

Attachments

Maximum 3 files.
10 MB limit.
Allowed types: txt, pdf, jpg, doc, docx, ppt, pptx, xls, and, xlsx.
10 MB limit per form.

Australian Privacy Principle 5 Notice

Your submission, including any personal information supplied, is being collected by the department for the purpose of seeking public and industry comment on the approach and content of its proposed cost estimation guidance, in accordance with the Privacy Act 1988 (the Privacy Act).

Your personal information will be stored securely by the department. It may be used by the department to make further contact with you about the consultation process. Your personal information will not be disclosed to any other third parties, except in the circumstances outlined below.

Submissions, in part or full, including the name of the author may be published on the department's website or in the Government's response, unless the submission is confidential. Confidential submissions (including author name) will not be published. Private addresses and contact details will not be published or disclosed to any third parties unless required by law.

Submissions will only be treated as confidential if they are expressly stated to be confidential. Automatically generated confidentiality statements or disclaimers appended to an email do not suffice for this purpose. If you wish you make a confidential submission, you should indicate this by ensuring your submission is marked confidential.

Confidential submissions will be kept securely and will only be disclosed in the following circumstances:

in response to a request by a Commonwealth Minister;
where required by a House or a Committee of the Parliament of the Commonwealth of Australia; or where required by law.

The department may also disclose confidential submissions within the Commonwealth of Australia, including with other Commonwealth agencies, where necessary in the public interest.

Please note that in order to protect the personal privacy of individuals in accordance with the Privacy Act any submissions containing sensitive information, personal information or information which may reasonably be used to identify a person or group of people may not be published, even if not marked as confidential.

The department's privacy policy contains information regarding complaint handling processes and how to access and/or seek correction of personal information held by the department. The Privacy Officer can be contacted on (02) 6274 6495.

Mardo Avenue, Australind - 059968-15WA-RTR

The old aggregate seal has extensive cracking that has resulted in stormwater penetrating the baseResealing this road with 30mm thick asphalt will extend the life of the road pavement

Hughes Street, Kununoppin - 059969-15WA-RTR

Streets to narrow, no direction of fall for drainage, no footpath on these streets, only 1 coat seal to which is worn.Widen Hughes street from Couper Street intersection heading west to Leake street intersection for 80 meters, install kurbing both sides of the street in this area for 80 meters, apply 1 coat seal of 5mm. Install 2 meter wide concrete footpath on south side of Hughes street from Couper street intersection heading west to Leake street intersection for 80 meters. Apply 5 mm 1 coat seal to Couper street starting from Hughes street intersection heading south to Lamond street intersection for 50 meters, install kurbing on west side of street for 50 meters and construct 2 meter wide concrete footpath on west side of Couper street for 50 meters between Hughes street intersection and Lamond street intersection.

Glider Court, Australind - 059970-15WA-RTR

The old aggregate seal has extensive crackingResealing this road with 30mm thick asphalt will prevent any water intrusion

Pelican Place, Australind - 059971-15WA-RTR

The old aggregate seal has extensive crackingResealing this road with 30mm thick asphalt will prevent any water intrusion

Aloomba Street, Chadstone VIC 3148 - 059972-15VIC-RTR

Old failing pavement with poor shape and potholes and steep cross-fall causing access problems, failing kerb and channel and inadequate drainage.Reconstruction/rehabilitation of the existing road pavement, kerb and channel and driveways to address pavement failure, shape, crossfall and failing kerb and channel. Provision of additional drainage to correct the drainage deficiency. Road width is 7.04m wide and is approximately 330m in lengthTotal cost of proposed project is $300,000

Coupe Road, Vesper - 059973-15VIC-RTR

Section of road contains insufficient pavement and requires constant maintenance worksResheet unsealed road with 100mm CL3 crushed rock, form drains and perform localised drainage works to improve road condition in this section.

Indigo Creek Road (rural road) - 059974-15VIC-RTR

Concrete Bridge has structural defects requiring a load limit restriction to be placed on bridgeInstall concrete overlay 15.5 metres long x 8 metres wide to bridge to enable removal of load limit restrictionTotal cost of proposed project is $142,885

Hell Hole Creek Road, (Rural Road) - 059975-15VIC-RTR

Unsealed section of road creating dust amenity issue to nearby residentsBitumen seal 220 metres long x 6 metres wide of road

Rosengren Lane, Stanley - 059976-15VIC-RTR

Under capacity road side drainage results in water across road during rain eventsInstall underground drainage and open drains for a total length of 120 metres

Cemetery Lane, Yackandandah - 059977-15VIC-RTR

Unsealed road on steep grade with high maintenance grading and resheeting frequency as a result stormwater scouring surface during heavy rainfall eventsSeal road for a total length of 220 metres x 5 metres wide and installation of 2 drainage pipes

There are no matches for your search