• Funding program Roads to Recovery Program
  • Status Completed
  • Transport mode Road
  • Expected start/finish Jul 2015 - Sep 2016
  • Estimated project cost $238,000
  • Australian Government contribution $155,000
  • Local Council/Shire Junee Shire Council
  • State NSW

Project description

Currently this section of Combaning Road does not meet agreed levels of service in the Council's Road Hierarchy. At the completion of the project this section will be upgraded to meet the agreed levels of service for a Category 2 road; that is a sealed travelling width of 6 metres wide (2 x 3 metre lanes). In addition the existing pavement is not of a standard to allow for Higher Mass Limit vehicle use. In addition to widening this road the pavement will be strengthen to permit Higher Mass Limited vehicle use.

To widen 1.7km of Combaning Road to include two 3 metre sealed lane and one metre gravel shoulders incorporating a 150mm granular overlay.

Total cost of proposed project is $238,000

Project last updated:

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.