Coronation Road, Rural Road - 059520-15WA-RTR

Funding program Roads to Recovery Program
Status Completed
Transport mode Road
Expected start/finish Jan 2016 - Jun 2016
Estimated project cost $1,269,000
Australian Government contribution $205,251
Local Council/Shire Shire of Waroona
State WA

Project description

There is a narrow bridge at the work location over the Waroona Main Drain. The bridge is of insufficient width to cater for modern traffic and has long been a safety concern to road users.

Replacement of the existing bridge with a precast box culvert structure which will allow an adequate and appropriate road width. Reconstruction of some 320 metres of Coronation Road to tie in with the new culvert structure.

Total cost of proposed project is $1,269,000

Project last updated: 10 Aug 2016

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.

Project disclaimer

Submissions or registrations of interest to be kept informed about the progress of this work, can be made directly via email to costestimation@infrastructure.gov.au or by using the form below.

Items marked with (required) are mandatory fields.

Name (required)

Email (required)

Organisation

Position

Please enter your comment (required)

Attachments

Maximum 3 files.
10 MB limit.
Allowed types: txt, pdf, jpg, doc, docx, ppt, pptx, xls, and, xlsx.
10 MB limit per form.

Australian Privacy Principle 5 Notice

Your submission, including any personal information supplied, is being collected by the department for the purpose of seeking public and industry comment on the approach and content of its proposed cost estimation guidance, in accordance with the Privacy Act 1988 (the Privacy Act).

Your personal information will be stored securely by the department. It may be used by the department to make further contact with you about the consultation process. Your personal information will not be disclosed to any other third parties, except in the circumstances outlined below.

Submissions, in part or full, including the name of the author may be published on the department's website or in the Government's response, unless the submission is confidential. Confidential submissions (including author name) will not be published. Private addresses and contact details will not be published or disclosed to any third parties unless required by law.

Submissions will only be treated as confidential if they are expressly stated to be confidential. Automatically generated confidentiality statements or disclaimers appended to an email do not suffice for this purpose. If you wish you make a confidential submission, you should indicate this by ensuring your submission is marked confidential.

Confidential submissions will be kept securely and will only be disclosed in the following circumstances:

in response to a request by a Commonwealth Minister;
where required by a House or a Committee of the Parliament of the Commonwealth of Australia; or where required by law.

The department may also disclose confidential submissions within the Commonwealth of Australia, including with other Commonwealth agencies, where necessary in the public interest.

Please note that in order to protect the personal privacy of individuals in accordance with the Privacy Act any submissions containing sensitive information, personal information or information which may reasonably be used to identify a person or group of people may not be published, even if not marked as confidential.

The department's privacy policy contains information regarding complaint handling processes and how to access and/or seek correction of personal information held by the department. The Privacy Officer can be contacted on (02) 6274 6495.

Cosgrove Court, Seville Grove - 059714-15WA-RTR

Asphalt surface - ravelling and potholing - 240m X 7.4mTraffic control. Raise gullies. Profile tie ins. Seal with 30mm AC7 asphalt.

River Road, Kelmscott - 059720-15WA-RTR

Inconsistant surface due to widening, median works and drainage installation.Resurfacing, part kerb replacement and path tie ins.Total cost of proposed project is $228,000

Devlins Bridge Rd - 059731-15NSW-RTR

loss of gravelresheet with gravel, 100 mm deep, 5 metres wide

Esplanade, Margate - 059733-15TAS-RTR

Current road is narrow and surface failing creating increased maintenance costs and a road safety issue due to increased traffic volumesWidening the road by installing a new retaining wall (seaside), remove existing pavement, stabalise and install new pavementTotal cost of proposed project is $1,706,838

Arkstone Road (rural road) - 059734-15NSW-RTR

Pavement has deteriorated due to heavy logging truck usage.Full rehabilitation of pavement, road widening and new drainage and extensions.

Merylands Road , Hillville - 059735-15NSW-RTR

Existing aging timber culvert has reached its end of service life and requires replacement to maintain the access to rural propertiesReplace existing timber culvert with concrete causeway/ concrete pipe structure

Wallanbah Road , Bucca Wauka - 059747-15NSW-RTR

existing aging timber culvert has reached end of its service life and requires replacement inorder to maintain the access ( Culver ID C4843)replace existing timber culvert with equivalent concrete pipe culvert

Caparra Road , Caparra - 059758-15NSW-RTR

Exiting aging timber bridge has reached end of its service life and requires replacement to maintain the accessReplace exiting timber bridge with equivalent Concrete Box CulvertTotal cost of proposed project is $245,000

Wickepin Pingelly Road, Wickepin - 059763-15WA-RTR

several road base failures and surface rutting over a one kilometre section of roadStabilize road base and seal with 2 coat seal using 14mm and 100 stone

Bullaring Road, (Rural Road) - 059764-15WA-RTR

Road base failure and surface rutting from water intruding from table drainStabilize road base and seal with a two coat bitumen seal using 14mm and 10mm stone. Reshape table drain and install geofabric material and rock armour to improve storm water discharge away from road

There are no matches for your search