Leane Drive, Eltham - 061760-15VIC-RTR

Funding program Roads to Recovery Program
Status Completed
Transport mode Road
Expected start/finish May 2016 - Jun 2016
Estimated project cost $59,610
Australian Government contribution $59,610
Local Council/Shire Nillumbik Shire Council
State VIC

Project description

Traffic speed and road safety. Leane Drive provides a short cut for through traffic at higher than acceptable speeds. Local Area Traffic Management Works are required to deter cut throughs and reduce traffic speed.

Installation of an asphalt raised intersection treatment at the Leane Drive - Marion Way Intersection, installation of two Watts profile road humps in Leane Drive, between marion Way and Mirtilga Place and the installation of another asphalt raised pavement treatment at the Leane Drive Mirtilga Place intersection. This would include all signage and linemearking.

Project last updated: 10 Nov 2016

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.

Project disclaimer

Submissions or registrations of interest to be kept informed about the progress of this work, can be made directly via email to costestimation@infrastructure.gov.au or by using the form below.

Items marked with (required) are mandatory fields.

Name (required)

Email (required)

Organisation

Position

Please enter your comment (required)

Attachments

Maximum 3 files.
10 MB limit.
Allowed types: txt, pdf, jpg, doc, docx, ppt, pptx, xls, and, xlsx.
10 MB limit per form.

Australian Privacy Principle 5 Notice

Your submission, including any personal information supplied, is being collected by the department for the purpose of seeking public and industry comment on the approach and content of its proposed cost estimation guidance, in accordance with the Privacy Act 1988 (the Privacy Act).

Your personal information will be stored securely by the department. It may be used by the department to make further contact with you about the consultation process. Your personal information will not be disclosed to any other third parties, except in the circumstances outlined below.

Submissions, in part or full, including the name of the author may be published on the department's website or in the Government's response, unless the submission is confidential. Confidential submissions (including author name) will not be published. Private addresses and contact details will not be published or disclosed to any third parties unless required by law.

Submissions will only be treated as confidential if they are expressly stated to be confidential. Automatically generated confidentiality statements or disclaimers appended to an email do not suffice for this purpose. If you wish you make a confidential submission, you should indicate this by ensuring your submission is marked confidential.

Confidential submissions will be kept securely and will only be disclosed in the following circumstances:

in response to a request by a Commonwealth Minister;
where required by a House or a Committee of the Parliament of the Commonwealth of Australia; or where required by law.

The department may also disclose confidential submissions within the Commonwealth of Australia, including with other Commonwealth agencies, where necessary in the public interest.

Please note that in order to protect the personal privacy of individuals in accordance with the Privacy Act any submissions containing sensitive information, personal information or information which may reasonably be used to identify a person or group of people may not be published, even if not marked as confidential.

The department's privacy policy contains information regarding complaint handling processes and how to access and/or seek correction of personal information held by the department. The Privacy Officer can be contacted on (02) 6274 6495.

Six Chain Road, Sandford - 059987-15VIC-RTR

At intersection some gravel pavement surface has worn and some sealed road pavement is failingRehabilitation of intersection road pavement with overlay and sealing. Renew table trains to suit

Bentinck Street, Portland - 059988-15VIC-RTR

Seal of road has worn / oxidised and pavement is failingAsphalting of the pavement surface

Garden Street, Portland - 059990-15VIC-RTR

Seal of road has worn / oxidised and pavement is failingResurfacing of the road, stone chip sealing (New Street to Railway Bridge) and Asphalting (from Railway bridge to Fitzgerald Place)

Learmonth Street, Portland - 059991-15VIC-RTR

Seal of road has worn / oxidised and pavement is failingAsphalting of the pavement surface

Lee Breakwater Road, Portland - 059992-15VIC-RTR

Seal of road has worn / oxidised and pavement is failingAsphalting of the pavement surface

Edgar Street, West Heywood - 059993-15VIC-RTR

Seal of road has worn / oxidised and pavement is failingAsphalting of the pavement surface

Percy Street, Portland - 059995-15VIC-RTR

Pavement is rutting and failingRehabilitation of road pavement with asphalt and long life line marking paint

Boundary Street, Redland Bay - 060021-15QLD-RTR

The existing surface and pavement is showing signs of distress and is near the end of its useful life - current condition of road not providing adequate level of service.Resealing of Road Surface. Binder Mix: BCC Type 3 & BCC Type 4 Length 272m Width 4m Treatment 50mm & 150mm

Qualeup South Road (Rural Road) - 060023-15WA-RTR

Wearing and cracked bitumen surface.Reseal bitumen with 14mm aggregate

Qualeup North Road (Rural Road) - 060024-15WA-RTR

Bitumen stripping and crackingReseal bitumen with 14mm aggragate

There are no matches for your search