Browns Plains Road, Crestmead - 061764-15QLD-RTR

Funding program Roads to Recovery Program
Status Completed
Transport mode Road
Expected start/finish Mar 2016 - Jun 2016
Estimated project cost $160,000
Australian Government contribution $160,000
Local Council/Shire Logan City Council
State QLD

Project description

Browns Plains Road, Crestmead is a local government road which is deteriorating in condition and is entering the later portions of its surfacing life cycle. Based on modelling from Council’s Pavement Management System it is appropriate to resurface Browns Plains Road to maximise retention of road value in the underlying pavement.

Pavement Rehabilitation is required for a total distance of 700 metres of Browns Plains Road, from Bayliss Road to Magnesium Drive. The works will primarily involve the milling and replacement of isolated failures as well as full asphalt resurfacing of the Magnesium Drive Roundabout.

Project last updated: 10 Aug 2016

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.

Project disclaimer

Submissions or registrations of interest to be kept informed about the progress of this work, can be made directly via email to costestimation@infrastructure.gov.au or by using the form below.

Items marked with (required) are mandatory fields.

Name (required)

Email (required)

Organisation

Position

Please enter your comment (required)

Attachments

Maximum 3 files.
10 MB limit.
Allowed types: txt, pdf, jpg, doc, docx, ppt, pptx, xls, and, xlsx.
10 MB limit per form.

Australian Privacy Principle 5 Notice

Your submission, including any personal information supplied, is being collected by the department for the purpose of seeking public and industry comment on the approach and content of its proposed cost estimation guidance, in accordance with the Privacy Act 1988 (the Privacy Act).

Your personal information will be stored securely by the department. It may be used by the department to make further contact with you about the consultation process. Your personal information will not be disclosed to any other third parties, except in the circumstances outlined below.

Submissions, in part or full, including the name of the author may be published on the department's website or in the Government's response, unless the submission is confidential. Confidential submissions (including author name) will not be published. Private addresses and contact details will not be published or disclosed to any third parties unless required by law.

Submissions will only be treated as confidential if they are expressly stated to be confidential. Automatically generated confidentiality statements or disclaimers appended to an email do not suffice for this purpose. If you wish you make a confidential submission, you should indicate this by ensuring your submission is marked confidential.

Confidential submissions will be kept securely and will only be disclosed in the following circumstances:

in response to a request by a Commonwealth Minister;
where required by a House or a Committee of the Parliament of the Commonwealth of Australia; or where required by law.

The department may also disclose confidential submissions within the Commonwealth of Australia, including with other Commonwealth agencies, where necessary in the public interest.

Please note that in order to protect the personal privacy of individuals in accordance with the Privacy Act any submissions containing sensitive information, personal information or information which may reasonably be used to identify a person or group of people may not be published, even if not marked as confidential.

The department's privacy policy contains information regarding complaint handling processes and how to access and/or seek correction of personal information held by the department. The Privacy Officer can be contacted on (02) 6274 6495.

Pages Road, Grove, Tasmania - 060164-15TAS-RTR

The existing road is deficient in strength and is breaking up in sections.To replace the existing drainage and culverts. Milling and stabilisation to a depth of 200mm, 120mm thick layer of compacted finely crushed rock and finished with a two coat seal.

Lucaston Road, Lucaston, Tasmania - 060165-15TAS-RTR

The existing road is deficient in strength and is breaking up in sections.Replace the existing drainage and culverts. Milling and stabilisation to a depth of 200mm, 120mm thick layer of compacted finely crushed rock and finished with a two coat seal.

Learmonth Road, Clunes - 060166-15VIC-RTR

Deteriorating pavement and getting beyond serviceable lifePulverise and prepare existing pavement, re-sheet with crushed rock, compact and seal.

Adavale Black Road (Rural Road) - 060167-15QLD-RTR

Unsealed road is subject to flood damage. Not suitable for tourist traffic.Upgrade to sealed standard

Sedan Road (rural road) - 060168-15QLD-RTR

This section of Sedan Dip Road is 2km of 6m wide unsealed black soil road. Sedan Dip Road is one the shire's arterial roads (linking the McKinlay and Cloncurry Shires)and is mainly subject to heavy vehicle movement (livestock industry)as well as tourist traffic. The unsealed sections of this road consistently requires extensive maintenance to maintain a safe trafficable status and is continually subject to restoration works following wet weather events (often impassable for at least 2 weeks at a time). Sealing segments of this road greatly enhances this road's all-weather status limiting disruptions to travelling public and pastoral industry traffic(heavy vehicle livestock movement/access).Formation and seal of 2km of 6m wide unsealed black soil road. The starting point for the 2km section of works on Sedan Dip Road to be approximately 32km of the Link Road intersection with Sedan Dip Road. Works to include re-instatement of shoulders, road markers, grid replacement (where necessary) and appropriate signage.Total cost of proposed project is $500,000

Kyabra Road (Rural Road) - 060169-15QLD-RTR

Sections of road are unsealed and do not cater for heavy traffic along this major arterial road.Upgrade to sealed standardTotal cost of proposed project is $1,729,646

Braemore Road Leonora - 060170-15WA-RTR

Movements of heavy vehicles including earthmoving equipment has resulted in ongoing maintenance issues where significant increase in maintenance grading has been required to maintain a suitable surface. Existing seal (0 straight line kilometres to 0.216 straight line kilometres) deteriorated. Dust has been an ongoing problem affecting nearby residents with these increased traffic movements. Two creek crossings present access issues in wet weather to nearby residents and heavy vehicles that frequent the road dailyThe 1216m proposed for sealing will be reconstructed by way of consolidating existing formation, gravel resheeting, waterbinding and finished with seal, with kerbing works to first 216m where existing kerbing and seal exist. Two creek crossings will be concreted to allow/improve all weather access.

Hell Hole Gorge Access Road (Rural Road) - 060171-15QLD-RTR

Access to gorge is limited by poor standard of existing road and lack of directional signage for tourists.Further upgrade formation to gravel road (stage 2), install additional directional and safety signageTotal cost of proposed project is $150,000

Sommerfield Road, Quilpie Town - 060172-15QLD-RTR

Seal width too narrow for heavy traffic on road through industrial area of QuilpieIncrease sealed width to 8metres

Memorial Drive Leonora - 060173-15WA-RTR

Road shoulders currently wash out each year presenting unsafe drop off on both sides of roads. Many vehicles, including caravans, traverse this road.Reconstruction and widening of shoulders to existing seal, including kerbing works and rock armour along both shoulders

There are no matches for your search