Austin Road, Capel - 124527-23WA-RTR

Funding program Roads to Recovery Program
Status Completed
Transport mode Road
Expected start/finish Mar 2024 - Jun 2024
Estimated project cost $97,750
Australian Government contribution $64,479
Local Council/Shire Shire of Capel
State WA

Project description

The bitumen seal along Austin Road has deteriorated due to weather, traffic and general wear and tear. A new seal is required to extend the life of the road pavement to avoid more costly repairs to the pavement and seal at a later date. NOTE: Project delay and reschedule due to; heading into the winter season, project design near completion, works scheduling still required.

Austin Road is an access road that services special rural lots near the town of Capel. It is proposed to undertake a bitumen re-seal to protect the road surface and pavement from Future degradation. Project scope amended, 30mm AC10 overlay in preference of bitumen reseal (bituminous products RFT 23/11).

Total cost of proposed project is $97,750

Project last updated: 7 Feb 2025

Disclaimer: The material contained in this site is made available on the understanding that the Department is not thereby engaged in rendering professional advice for a particular purpose. Before relying on the material in any important matter, users should carefully evaluate the accuracy, completeness and relevance of the information for their purposes and should obtain appropriate professional advice relevant to their particular circumstances.

Project disclaimer

Submissions or registrations of interest to be kept informed about the progress of this work, can be made directly via email to costestimation@infrastructure.gov.au or by using the form below.

Items marked with (required) are mandatory fields.

Name (required)

Email (required)

Organisation

Position

Please enter your comment (required)

Attachments

Maximum 3 files.
10 MB limit.
Allowed types: txt, pdf, jpg, doc, docx, ppt, pptx, xls, and, xlsx.
10 MB limit per form.

Australian Privacy Principle 5 Notice

Your submission, including any personal information supplied, is being collected by the department for the purpose of seeking public and industry comment on the approach and content of its proposed cost estimation guidance, in accordance with the Privacy Act 1988 (the Privacy Act).

Your personal information will be stored securely by the department. It may be used by the department to make further contact with you about the consultation process. Your personal information will not be disclosed to any other third parties, except in the circumstances outlined below.

Submissions, in part or full, including the name of the author may be published on the department's website or in the Government's response, unless the submission is confidential. Confidential submissions (including author name) will not be published. Private addresses and contact details will not be published or disclosed to any third parties unless required by law.

Submissions will only be treated as confidential if they are expressly stated to be confidential. Automatically generated confidentiality statements or disclaimers appended to an email do not suffice for this purpose. If you wish you make a confidential submission, you should indicate this by ensuring your submission is marked confidential.

Confidential submissions will be kept securely and will only be disclosed in the following circumstances:

in response to a request by a Commonwealth Minister;
where required by a House or a Committee of the Parliament of the Commonwealth of Australia; or where required by law.

The department may also disclose confidential submissions within the Commonwealth of Australia, including with other Commonwealth agencies, where necessary in the public interest.

Please note that in order to protect the personal privacy of individuals in accordance with the Privacy Act any submissions containing sensitive information, personal information or information which may reasonably be used to identify a person or group of people may not be published, even if not marked as confidential.

The department's privacy policy contains information regarding complaint handling processes and how to access and/or seek correction of personal information held by the department. The Privacy Officer can be contacted on (02) 6274 6495.

Wongawol Road (Rural Road) - 059958-15WA-RTR

Culvert has deteriorated over a number of years, creating a hazard for road users and requires replacingReplace culvert, reconstruct road section

Carnegie Road (Rural Road) - 059959-15WA-RTR

Culvert headwalls have deteriorated over a number of years, causing roadway erosion and creating hazard for road users.Replace culvert, extend pipes, reinstate roadway

Little James Street, Kingston SE - 059960-15SA-RTR

Little James Street is no longer adequate for the volume of traffic, as the road is currently narrow the road suffers from edge break. There is no control over stormwater at the moment, the stormwater is scouring the edge of the road and driveways.Little James Street will be fully reconstructed and widened to 7.5m from the existing 6m and kerbed on both sides to control stormwater run off. And 10.5m wide sealed footpath will be constructed.

Ellery Road, Kingston SE - 059961-15SA-RTR

Road profile is poor,and subject to pot holing. Road is also narrow. This road is a commodity route and needs to be widened.Resheet with 250mm crushed rubble, widen to road to 6.5m and provide new profile to enable stormwater run off.Total cost of proposed project is $40,000

Safari Road, Kingston SE - 059962-15SA-RTR

Road profile is poor and subject to pot holing. Road is also narrow with crest that cause poor sight distance. The road is a commodity route and needs to be widened.Resheet with 250mm crushed rubble, widen road to 6m and provide profile to enable stormwater run off.

Barker Street,York. - 059963-15WA-RTR

Drainage issues, bitumen surface pot holed and narrow pavement area.Reconstruct, Widen, Kurb and Two Coat Seal as per Design.

Melville Road (rural road) - 059964-15WA-RTR

Pavement failure and uneven surfaceReconstruct failed pavement and seal seven metres wide

Wellesley Road South (rural road) - 059965-15WA-RTR

Increased edgewear caused by increase in traffic volume and traffic compositionWiden and seal shoulders by one metre each side of road

Beddingfield Way, Australind - 059966-15WA-RTR

The old aggregate seal is losing stone and becoming porous which allows stormwater to penetrate the baseResealing this section of road with 30mm thick asphalt will protect the pavement

Pearce Road, Australind - 059967-15WA-RTR

The old aggregate seal has extensive cracking that will result in water inundationResealing this road with 30mm thick asphalt will extend the life of this road pavement

There are no matches for your search