loss of resealing aggregateReseal 1km segment of road with 14mm/7mm two coat seal
loss of resealing aggregateReseal 1km of road with 14mm/7mm two coat seal
Failure of asphalt surface and pavementRoad segment to be profiled to a depth of 45mm, rehabilitation of pavement material and constructed with new asphaltTotal cost of proposed project is $146,801
Road is too narrow to safely cater for new school bus routeWiden and seal existing road, construct kerb & channel, carry out stormwater and telecommunications works as necessaryTotal cost of proposed project is $210,308
The previous seal used on the road does not provide sufficient grip, slip resistance is negligible and the area has a history of accidents.Excavation and pavement reconstruction as well as High Friction hotmix resurfacing to a depth of 250mm. The total restoration area is 11,500 square metres.Total cost of proposed project is $536,231
Existing pavement has badly deteriorated and is unsafe for vehicles due to the many pothole patches and irregularities on the road surfaces.Renewal of low standard pavement with minimum 80mm fine crushed rock.
Severe road undulation, longitudinal cracks and kerb and gutter damageKerb maintenance and reseal
pavement is damaged, seal is worn, surface drainage is poor, kerbing is damagedextensive pre-seal repairs including patching, pavement repairs, replace damaged kerbing, followed by re-seal
The current condition of the seal is very poor.Rehabilitation, asphalt regulation, edge repairs and crack sealing will be undertaken as preparation works prior to the commencement of sealing work. Linemarking will also be reinstated.Total cost of proposed project is $257,540
The current condition of the seal is very poor.Road rehabilitation, asphalt regulation, edge repairs and crack sealing will be undertaken as preparation works prior to the commencement of sealing work. Linemarking will also be reinstated.Total cost of proposed project is $149,000